The Height of Songs Picture Frame is 18 Inches

Measuring your art correctly is perhaps the most important stride in the framing process — if the art size is off, the residual of the measurements for the frame, matting, cover, backing, etc. will as well be off, and we don’t want that!
*Even if your artwork or the artist claims it to be a certain size, y’all should always measure it yourself to confirm – only to make sure you receive a frame that fits perfectly.

How to Read a Ruler

Some rulers take an English side– inches, feet, yards, etc.– and a metric side– millimeters, centimeters, meters, etc.  The marks on a ruler all have dissimilar lengths, because they announce different fractional increments.

On the English language side, the longest ones mark each inch. The second to longest ones mark each half-inch; the third-longest mark each quarter-inch; the fourth-longest mark each eighth of an inch; and the 5th-longest mark each sixteenth of an inch.

When lining up the ruler to your fine art, information technology’s of import to line it up with the nearest fractional increment. So, if the finish of your artwork lines up with the line is 8th from the full inch marking, you lot would demand to supplement your measurement with “1/2.”

One time once again keep in mind that this measurement will dictate the cut of the frame, bankroll, and acrylic, so it’s of import to make it every bit precise every bit possible. Considering of this, we
strongly advise
you use a standard, rigid measuring tape to measure your art, as flexible measuring tapes (such as ones used to measure textile) may non exist entirely accurate with measuring art and photography.

Millimeters (mm) vs. Centimeters (cm) vs. Inches (in)

In some cases art or photos are measured using millimeters (mm) or centimeters (cm), both office of the metric arrangement (an internationally recognized system of measurement).

1 in = 25.four mm = ii.54 cm

E’er make sure you lot know which unit of measurement you’re dealing with to make sure results are authentic.

Here are Frame It Like shooting fish in a barrel we utilise inches every bit our standard unit of measurement of measurement. For any art that is measured in increments other than inches, yous’ll want to brand certain you double check and convert the numbers before entering your measurements into our frame designer.

How to Properly Mensurate Fine art

For art y’all already have, you should offset by placing your art in the correct orientation of how you’d like to view it, and so measure the width and height of your art, as well equally its thickness.

Width =the horizontal measurement left to right

Peak = the vertical measurement peak to bottom

*Thickness =the depth measurement from forepart to back

*For thickness, you should consider the following: If it’south over one/4” thick, look for a framer that can create shadow box frames, which are great for wrapped canvas, 3D collectibles, and jerseys.

*For artwork thinner than i/4”, a standard picture frame will likely suffice, and those are generally the easiest to find.

Orientation: Portrait vs. Landscape

There are two different types of orientation to a frame; their technical names are
portrait
(vertical), and
landscape
(horizontal).

The orientation is dictated by which measurement has the greater value, and
the standard format for cogent size is ever width kickoff, then height, or WxH.

For instance, frame with the measurements of viii″ Ten 10″– the first number beingness “Width” and the second being “Height”– is portrait.

For a frame with the same measurements, merely a landscape orientation, you would go with x″ X eight″– the greater number being assigned to the “Width” measurement.

Handy Tip: Y’all can easily orient your frame to landscape with the iii L’south: To make a
Landscape, the
Larger dimension is entered on the
50eft.

Your art’due south orientation is important as this will affect which direction your hanging wire is placed.

Will Any Part Of My Fine art Exist Covered Past The Frame? What If My Fine art Has A Border?

All picture frames generally require some sort of slight overlap (ane/4″) to go along your fine art held in place.

If your art has a border surrounding information technology that you might not want shown in your final frame, you lot have some options to cover it by calculation matting.

To learn more y’all can dive a little deeper into the one/4″ overlap that is necessary for picture framing.

Sizing Digital Art

For digital artworks or photographs you generally won’t accept to worry almost manually measuring, but there are all the same some considerations when it comes to sizing.

You can read more about DPI and quality in our mail service nigh formatting digital photos, simply the most important thing to retrieve is to always utilise the highest resolution image possible for the best results.

Final Thoughts

Here are a few things to think:

• Ever consider your orientation and brand sure your measurements are in the Width x Height format.
  • If you lot want mural, make sure your “Width” measurement is greater.
  • If yous want portrait, brand sure your “Elevation” measurement is greater.
• If your fine art is thicker than ¼”, definitely look for shadow box frames.
• Continue fractional increments on a ruler in mind, and always try to line your artwork up with the closest one.
• For digital art, 300+ DPI is the all-time quality to print at virtually whatever size.

Measuring art can be straightforward, only information technology is besides essential that y’all get it correct. Information technology would be unfortunate if you were unable to frame your art every bit a effect of wrong measurements, and so hopefully the info above has equipped you to go a measuring master.

This mail first appeared every bit How To Measure Your Art For Framing (And Go The Best Results) on Frame It Like shooting fish in a barrel – Learning Eye for Custom Picture Framing.